Product Profile:
CUALI® Metal glue is a new type of two-component quick-drying adhesive for metal bonding and repairing (replacing welding). It can be used for bonding and repairing cracks, defects, wear, scratches, corrosion, and fractures of metal products such as cast iron, steel, aluminum, and alloys, such as: metal castings, containers, pipes, components, electrical appliances, mechanical equipment, etc.
CUALI® Metal glue uses A and B two-component hose portable packaging, which is easy to operate. It has the advantages of high temperature resistance, corrosion resistance, high bonding strength, easy construction, oil and water resistance, durability, economical and practical, etc. On the premise of not affecting the strength and performance of castings, the use of CUALI® Metal glue for bonding and repairing is quick and convenient, and can also save costs. It is the first choice for casting bonding and repairing.
Application:
Metal Bonding, repairing of engine, water tank, ceramic, fence, metal pipe, etc.
Product Features:
High and low temperature resistance, not afraid of temperature difference
Super strong adhesion, can replace welding
Easy to operate and easy to construct
Can be drilled, milled, sanded and painted
Product Specification: 100ml
Shelf life: 8 month
Construction method
Cleaning and drying: Thoroughly clean the pollutants on the surface to be repaired, such as dust, grease, demoulding machine and rust spots, etc., and keep the surface dry, water-free, oil-free, rust-free and dust-free;
Glue removal: take off the end cap, depending on the amount of usage, insert the booster push rod into the bottom of the glue bottle, and squeeze out the glue
Stirring: Mix the extruded glue of components A and B fully with a scraper
Construction operation: Apply the glue evenly on the surface for bonding or repairing, and let it solidify. Do not move assembly during curing. The bond cannot bear the load until it is fully cured.
Remark:
1. The initial curing time is 5 minutes, and the complete curing time is 24 hours.
2. After 30 minutes, the surface can be ground, drilled and milled
Official account
